LAKUM
LAKUM offers surface treatment within a broader Czech manufacturing group. Its finishing operations include zinc-based plating as well as e-coating and powder coating. U.S. buyers should establish the responsible plant and cross-border supply arrangements during the initial inquiry.
(https://lakum.cz/en/)
Challenges LAKUM Can Help Solve
Routing different part sizes to the appropriate line
LAKUM distinguishes rack processing at Frýdlant from bulk processing for small parts at LAKUM-GALMA. This makes the incoming part form an important routing decision. Fasteners and small stampings should not be assumed to use the same line as larger components.
Specifying a complete protective finish
The group offers plated coatings alongside e-coating and powder coating, including combined treatment systems. Define the full layer sequence when additional protection is needed, keeping deposited zinc separate from the subsequent paint coating.
Setting acceptance conditions before production
LAKUM-GALMA’s delivery terms call for agreement on appearance and packaging before series production. They also distinguish technical surface treatment from a guaranteed cosmetic finish. Buyers should define any visible zones, allowable marks, and transport protection before approving samples.
Supported Plating Processes
| Types of Plating | Zinc and zinc-nickel electroplating; passivation and sealing are supplementary treatments |
|---|---|
| Substrates | Metal components including fasteners, castings, and forgings are described. Confirm the exact alloy and its suitability for the chosen plant and process. |
| Functional Properties | Corrosion protection as a final treatment or as part of a combined coating system |
When Is LAKUM a Good Fit?
Discuss LAKUM for recurring metal-component work requiring zinc-based finishing or an integrated manufacturing and coating route. Include dimensions, weight, material, annual volume, and packaging expectations. Confirm U.S. shipment terms and the receiving facility before sending parts; plant-specific capacity limits should be checked against the quotation.
This site introduces plating companies for different industries and component requirements. Compare the available services with your drawing and purchasing specifications.
Company Profile
| Company Name | LAKUM Group — LAKUM-KTL, a.s. / LAKUM-GALMA, a.s. |
|---|---|
| Company Address | LAKUM-KTL: Ostravská 384, 739 11 Frýdlant nad Ostravicí, Czech Republic; LAKUM-GALMA: Pražská 1648, 396 01 Humpolec, Czech Republic |
| U.S. Locations | Not identified in the official pages reviewed |
| Official Website | LAKUM |
Functional Plating Services
by Industry
and Component Type
Semiconductor Components
“We need a shop for difficult plating others declined.”
Japan, est. 1931
- Precious Metal Plating
for Micro Components - Mitsuya supports uniform precious metal plating on parts down to 0.1 mm in diameter. This can help improve precision and durability in semiconductor inspection equipment.
- High-Adhesion Plating
for Tips and Contacts - Mitsuya has developed an in-house process for titanium and tungsten that does not require heat treatment. It can support high-adhesion plating on pin and card contact areas.
- Support for New Product Development
- Engineers can consult Mitsuya before semiconductor IC specifications are finalized and verify performance through prototypes. This can help reduce development risk and rework costs.
- Electronics and Telecommunications
- Semiconductor Inspection Equipment
- Space Development
Automotive Components
“We need 10 million parts delivered on time, every time.”
U.S., est. 1932
- Consistent Quality and
Lead Times at Volume - Greystone has an annual mass-production record of 130 million automotive parts*1 through machining and plating.
- Single-Source Support from Processing through Plating
- Machining and plating are completed within the same group. Fewer delays between processes can help reduce costs.
- Quality Standards
Automakers Trust - All U.S. locations are IATF 16949 certified, with plating process control that meets OEM quality standards.
- Automotive
- Firearms
Aircraft
Components
“Nadcap is required. We need proven certification experience.”
U.S., est. 1960
- Smoother Approval
from Major Primes - An approved supplier to Boeing, Lockheed Martin, and others, with more than 80 Nadcap-accredited processes.
- Aerospace & Defense Work on a Certification-First Basis
- Proven across a wide range of mission-critical components, including missiles and fighter aircraft.
- Meets Defense Standards, Even the Strictest
- Its cadmium-replacement zinc-nickel plating won a 2020 Secretary of Defense Environmental Award and has been used on the F-35*2.
- Aerospace and Defense
- Medical Devices
*2 Source: Anoplate official website https://www.anoplate.com/news-and-events/zinc-nickel-plating-highlights-2020-secretary-of-defense-environmental-award/